Laminates & cores

Substrates

Laminate and core-focused articles for stackup planning - substrate families, dielectric behavior, copper-clad constructions, and how XFPCB builds manufacturable multilayer structures.

FPC Coverlay Opening Accuracy: Registration & CAM Compensation

Factory CAM playbook for flex PCB coverlay openings on SMT/HDI pads: process tolerance stack (cut method, registration, adhesive squeeze-out, shrinkage), per-side oversize vs stencil, too-small/too-large failure modes, fab drawing notes, FAI/AOI acceptance, and RFQ questions -?confirm µm/mm guidance with your fab.

Read article

HDI Flex Micro-Bump Array: Spec Selection & Process Playbook

Factory playbook for HDI flex micro-bump arrays: use-case selection (solder flip-chip/CSP vs probe/compression vs through-dielectric), window/process route, metal stack vs contact duty, height and coplanarity acceptance, drawing notes, FAI, and China fab RFQ checklist -?confirm µm/pitch guidance with your fab.

Read article

Flexible PCB Types: Structure Options That Match RFQ Quotes

Name flexible PCB structure types so China fab quotes match: 1S / 2S±PTH / multilayer flex / rigid-flex / HDI blind-buried / flying-lead, why layer count raises bend stiffness, auxiliaries as RFQ add-ons, IPC-6013 Type 1-? naming, and an RFQ checklist -?confirm class/type with fab.

Read article

Flying Lead Flex PCB: Dual-Access Spec, Process & RFQ

Factory playbook for flying-lead / dual-access FPC: same Cu exposed both sides (coverlay + base film removal) -?double-sided via interconnect, 1S vs 2S complexity, use-case triggers, pre-cut coverlay limits vs laser/plasma/chemical for small windows (~1.0 mm class -?confirm with fab), design notes, FAI, and China fab RFQ checklist.

Read article

Flex PCB Bend Radius Guide: Dynamic Bend Life & FPC DFM

Pure flex FPC bend radius for dynamic bend life: neutral-axis copper placement, stackup symmetry, radius vs thickness starting guidance to confirm with fab, and drawing/RFQ callouts (bend line, direction, cycle target) for China fab quotes -?not rigid-flex failure autopsy or keyboard FR-4 flex-cut.

Read article

Frequently asked questions

Why do substrate choices matter for multilayer PCBs?

Core and prepreg choices set thickness, impedance, thermal behavior, and CAF risk. Wrong dielectric assumptions force CAM changes late in the quote or fab cycle.

Should I lock substrate brand on every board?

Only when electrical or qualification needs require it. Many FR4 builds allow approved equivalents; high-frequency or automotive programs may need named laminates in the fab notes.