Test & inspection

Testing

Test and inspection articles for bare board and assembled PCB - coverage strategies, defect types, when to add ICT or FCT, and how XFPCB builds reliable quality gates into manufacturing.

PCBA Gated Traveler: Entry, Exit & Hold Points

PCBA as a gated traveler for overseas buyers: entry criteria, exit evidence, EQ/hold points, proto vs volume optional stations, RFQ in-scope callouts, skip-gate failure modes, and a CM traveler audit checklist—not an SMT/DIP flowchart.

Read article

PCBA Programming RFQ: Traveler Slot, Checksum & Evidence

Where firmware programming sits on the PCBA traveler (pre-SMT vs post-reflow vs FCT nest), RFQ callouts for image hash, checksum, UID/OTP, fixture class, yield traps (false-fail vs bad flash), DFT pads, and overseas acceptance evidence—not a programmer catalog.

Read article

Flip Board PCB Clarified: Flip-Chip / FC-BGA DFM & RFQ

Factory playbook clarifying flip board PCB search intent: flip-chip attach vs EDA mirror, DCA bare die vs finished FC-BGA, board DFM (fan-out/VIP/HDI, SI/PDN, thermal/CTE, datasheet land pattern), underfill + X-ray/SAM inspection, reliability RFQ language, and a China fab/EMS comparable checklist -?confirm pitch/void/warpage with your plant.

Read article

Flying Probe Testing: When It Wins, DFT Spec & RFQ

Factory playbook for flying probe electrical test: fixtureless FPT vs bed-of-nails ICT volume/setup gate, bare board vs PCBA coverage (opens/shorts/R/C/polarity vs not full FCT), DFT pad/spacing/fiducial/BGA-breakout guidance to confirm with fab, programming file pack, AOI/X-ray/FCT stack, and China fab/EMS RFQ checklist.

Read article

FQC & PCB Packaging: Final Gate Spec and RFQ

Factory final-gate playbook: place FQC in the IQC→IPQC→AOI/ET→FQC→OQA buyer chain, bare PCB vs PCBA FQC scope, what FQC does not catch, and outbound packing RFQ (clean→MBB/desiccant/HIC→ESD if PCBA→cushion→labels→QC docs) with confirm-with-fab moisture/ESD class language and a comparable China fab checklist.

Read article

Functional Circuit Testing: When to Power On, DFT & RFQ

Factory playbook for powered FCT: when to power on after AOI/X-ray/flying-probe-or-ICT, volume gate from bench to reusable nest to custom fixture, what FCT catches that structural tests miss, what it does not replace, DFT for power/debug/fixture/golden-board, and China fab/EMS RFQ checklist (pass/fail, firmware rev, fixture ownership, cycle class, data logs).

Read article

Flex PCB Bend Radius Guide: Dynamic Bend Life & FPC DFM

Pure flex FPC bend radius for dynamic bend life: neutral-axis copper placement, stackup symmetry, radius vs thickness starting guidance to confirm with fab, and drawing/RFQ callouts (bend line, direction, cycle target) for China fab quotes -?not rigid-flex failure autopsy or keyboard FR-4 flex-cut.

Read article

Frequently asked questions

Which tests does XFPCB commonly offer?

Depending on the job: electrical test, AOI, X-ray for BGA/QFN, flying probe, ICT, and functional test when fixtures or scripts are available. Requirements belong in the RFQ notes.

How do I specify test coverage in an order?

State required inspections, accept criteria, and any fixture or golden-sample needs in the manufacturing notes, or ask Technical Support before release.